Singer 14T968DC PROFESSIONAL 5 Instruction Manual - Page 89
Before threading the eye of the needle, make sure the thread is
View all Singer 14T968DC PROFESSIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5. Continue to thread points 4-8. Slip the thread into the rear slot of the thread guide . Go over the take up lever . Continue by slipping the thread into the right slot of the thread guides and . 8. Before threading the eye of the needle, make sure the thread is behind the thread guide located on the bottom of the needle clamp. 9. Draw about 4 inches of the thread through the needle eye towards the back of the machine. 10. Place the thread to the back, under the Presser Foot. Three-Thread Flatlock (narrow) page 13
5. Continue to thread points 4-8.
Slip the thread into the rear slot of the
thread guide
g
.
Go over the take up lever
h
.
Continue by slipping the
thread into the right slot of the thread guides
i
and
j
.
8. Before threading the eye of the needle, make sure the thread is
behind
the thread guide located on the bottom of the needle clamp.
9. Draw about 4 inches of the thread through the needle eye towards the back
of the machine.
10. Place the thread to the back, under the Presser Foot.
Three-Thread Flatlock (narrow) page 13