Singer 3333 FASHION MATE Instruction Manual and Troubleshooting Guide - Page 24
Sewing a Button
View all Singer 3333 FASHION MATE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
23 START SEWING Sewing a Button Stitch Selector Dial Stitch Length Dial This machine includes a Button Sewing Foot, allowing you to attach buttons to your projects easily and quickly. HOW TO: 1. Set the machine to Straight Stitch by turning the Stitch Selector Dial to the Straight Stitch Symbol. (see page 19) 2. Set the Stitch Length Dial to 0 to begin. (see page 19) SEW ALONG: Attaching a Button 1. Attach the Darning Plate to the needle plate directly below the presser foot. To do this line up the prongs on the underside of the Darning Plate with the holes in the needle plate. Push down to snap it in place. 2. Remove the All Purpose Foot and attach the Button Sewing Foot. (see page 26). 3. Set the Stitch Length Dial control so that 0 is directly below the dot. 4. Set the Stitch Selector Dial so that the Straight Stitch setting is directly below the dot. 5. Place the button on the fabric, then line up the button directly under the front of the Button Sewing Foot so the 2 holes of the button appear in front of the foot. Turn the hand wheel towards you to make sure the needle clears the hole on the left. Step on the foot control and sew 3 to 4 securing stitches. Raise the needle out of the fabric and the button. 6. Set the Stitch Selector Dial so that the Zig Zag setting is directly below the dot. Adjust the dial until the needle moves from the left hole into the right hole of the button without interference. To test the movement of the needle turn the handwheel manually towards you several times to make sure the needle does not hit the button. Sew 10 to 12 stitches. 7. Set the Stitch Selector Dial so that the Straight Stitch setting is directly below the dot. 8. Sew 3 to 4 stitches to secure the stitching. 5HPRYHWKH'DUQLQJ3ODWHZKHQ¿QLVKHG 24