Singer CG-500 Commercial Grade Instruction Manual - Page 14

Satin Stitch Appliqué

Get Singer CG-500 Commercial Grade PDF manuals and user guides View all Singer CG-500 Commercial Grade manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Satin Stitch Appliqué Satin Stitching is a series of closely spaced zig-zag stitches. Satin Stitching can be used for monograms, embroidery and appliqué work to produce a smooth satin-like appearance. Try a rayon thread for a smoother looking finish. Machine Set-Up: Stitch: Pattern Selector: Stitch Width: Stitch Length: Presser Foot: Needle Position: Zigzag Stitch B 2-3 0.5-1 Special Purpose Foot (J) Center Materials: 2" x 3" cotton fabric for appliqué 2" x 3" fusible stabilizer 6" x 6" cotton foundation fabric 6" x 6" tear-away stabilizer Procedure: Press the fusible stabilizer onto the appliqué. Fuse the appliqué onto the cotton foundation fabric. (Fusing the appliqué into place will keep the appliqué from shifting while stitching.) Place a tear-away stabilizer underneath the fabric. (This is used to ensure quality stitching when using dense stitches.) Place the applique under the foot, so that half of the stitch will form on the applique and half on the base fabric. Sew around the applique. Widen the stitch width to 4 and change the stitch length to below 1. . 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
9
Satin Stitch Appliqué
Satin Stitching is a series of closely spaced zig-zag stitches.
Satin Stitching
can be used for monograms, embroidery and appliqué work to produce a
smooth satin-like appearance.
Try a rayon thread for a smoother looking
finish.
Machine Set-Up
:
Stitch:
Zigzag Stitch
Pattern Selector:
B
Stitch Width:
2-3
Stitch Length:
0.5-1
Presser Foot:
Special Purpose Foot (J)
Needle Position:
Center
Materials
:
2” x 3” cotton fabric for appliqué
2” x 3” fusible stabilizer
6” x 6” cotton foundation fabric
6” x 6” tear-away stabilizer
Procedure
:
±
Press the fusible stabilizer onto the appliqué.
±
Fuse the appliqué onto the cotton foundation fabric.
(Fusing the appliqué into place will keep the appliqué from shifting
while stitching.)
±
Place a tear-away stabilizer underneath the fabric.
(This is used to
ensure quality stitching when using dense stitches.)
±
Place the applique under the foot, so that half of the stitch will form on the
applique and half on the base fabric.
±
Sew around the applique.
±
Widen the stitch width to 4 and change the stitch length to below 1.
.