Singer CG-500 Commercial Grade Instruction Manual - Page 47
Sewing with the Side Cutter
View all Singer CG-500 Commercial Grade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sewing with the Side Cutter The side cutter is an attachment that will trim the excess fabric while sewing. A Zigzag-type stitch must be used. Machine Set-Up: Stitch: Pattern Selector: Stitch Width: Stitch Length: Presser Foot: Needle Position: Zigzag B 5 1-2 Side Cutter* Center Materials: (2) 5" x 4" pieces of wool type fabric Procedure: Cut a 1" x 1" notch in the fabric. The cutter's blades "cut" before the needle stitches. Be sure to position the fabric under the needle before beginning to sew. Place the fabric OVER the first metal platform and UNDER the second metal platform. If the cutter is not cutting, it is usually due to the fabric not being placed OVER the first platform. View: Looking down at cutter Turn the hand-wheel to ensure the the needle does not hit the stitch finger. The stitch width may need to be adjusted. *The Side Cutter is optional. Check with your SINGER® Retailer. 42