Singer Classic Finish Instruction Manual - Page 4

Selecting the Temperature CONSULT THE GARMENT'S LABEL FOR TEMPERATURE INSTRUCTIONS. WE RECOMMEND USING THE CHART BELOW AS A GUIDE. Temperature Control Settings acetate elastane polyamide polypropylene polyester silk triacetate viscose wool cotton linen • Plug the iron into a grounded electrical outlet. The iron will begin to heat. • To adjust the temperature settings, turn the Temperature Control Dial clockwise and select the temperature setting according to the recommendation on the garment label. The Temperature Indicator light will glow. • When the selected temperature is reached, the Temperature Indicator light will turn off. The iron is ready to use. Ironing your garments Dry Ironing • To iron without steam, turn the Variable Steam Control Dial to the "no steam" position . Select the desired temperature ( , , or ). • To iron garments with a dry iron, SINGER recommends using this iron with an empty water tank. Steam Ironing WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING WORN. NEVER DIRECT THE STEAM JET AT People OR ANIMALS. • Fill the water tank as described in "Filling the Water Tank" section. • Plug the iron into a grounded electrical outlet. The iron will begin to heat. Select the or MAX temperature setting by turning the Temperature Control Dial clockwise. • When the selected temperature is reached, the Temperature Indicator light will turn off. The iron is ready to use. • Select the desired steam pressure on the Variable Steam Control Dial. • When the selected temperature is reached, the Temperature Indicator light will turn off. The iron is ready to use. TIP: The tougher the wrinkle, the more steam you will need. Turning the Iron Off • To turn the iron off, unplug the iron. NOTE: Never yank the cord to disconnect from outlet. Always grasp plug and pull to disconnect. 6 dry iron setting steam iron setting 7