Singer Classic Finish Instruction Manual - Page 5

Burst of Steam This function is ideal for removing stubborn wrinkles or pressing extra-sharp creases. WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING WORN. NEVER DIRECT THE STEAM JET AT People OR ANIMALS. • Follow the instructions as described in the "Steam Ironing" section. • While steam ironing, press the Burst of Steam button every 4 to 5 seconds. Most wrinkles can be removed within three bursts. NOTE: It may be necessary to press the Burst of Steam button a few times to start this function. For optimum steam quality, do not operate the Burst of Steam more than three times in succession. Vertical Burst of Steam This feature enables you to remove wrinkles from hanging garments (jackets, coats, shirts), hanging curtains, or other hanging fabric. WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING WORN. NEVER DIRECT THE STEAM JET AT People OR ANIMALS. • Follow the instructions as described in the "Steam Ironing" section. • Hold the iron upright, 6-12 inches away from the garment. • Press the Burst of Steam button to direct steam at the area. • Steam will penetrate into the garment, removing the wrinkles. • For stubborn wrinkles, wait 4 to 5 seconds before pressing the Burst of Steam button again. Most wrinkles can be removed within three bursts. NOTE: Maintain a distance of 6-12 inches from delicate fabric (synthetics, silk, velvet, etc.), otherwise the fabric could be damaged. It may be necessary to press the Burst of Steam button a few times to start this function. For optimum steam quality, do not operate the Burst of Steam more than three times in succession. Burst of Steam Button 8 burst of steam vertical burst of steam Cool Mist Spray The Cool Mist Spray function can be used on any temperature setting. Use the spray to dampen fabrics in order to remove tough wrinkles. • Aim the nozzle at the garment. • Press the Cool Mist Spray Button. You may need to press the button a few times before the water sprays at full pressure. • Iron as usual. • Do not spray silk. Cool Mist Spray Button cool mist spray 3-Way Smart Auto-Off The SINGER Classic Finish Iron is equipped with an automatic shut-off. The Smart Auto-Off switches the iron off if it has been left unattended. • If the iron is left on and is not moved for 8 minutes in a vertical position, it will automatically shut off and a beep will sound. • If the iron is left on its soleplate or tipped over, it will shut off after 30 seconds and an audible beep will sound. • The Smart Auto-Off Indicator light will flash, indicating the Auto-Off has been activated. • To de-activate the Auto-Off, move the iron or shake gently. The iron will take about 60 seconds to reach the previous soleplate temperature. • To turn the iron off, unplug the iron. 9