Singer Expert Finish Instruction Manual 2 - Page 8

IRONING YOUR GARMENTS Dry Ironing • Turn the iron on as described in the "Turning the Iron On and Off" section. • Dry iron is the automatic setting. • Select the desired temperature by pressing the Temperature UP (+) and Temperature DOWN (-) buttons on either side of the LCD Display. An audible beep will sound each time the temperature is changed. • When the selected temperature is reached, HEATING on the LCD Display will stop flashing and disappear, indicating that the iron is ready to use. • If the steam setting is the current selection, press the Steam Adjust Button located above the LCD Display to deactivate the steam setting. An audible beep will sound. • To iron garments with a dry iron, SINGER® recommends using this iron with an empty water tank. Steam Ironing WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING WORN. NEVER DIRECT THE STEAM JET AT PEOPLE OR ANIMALS. • Fill the water tank as described in "Filling the Water Tank" section. • Turn the iron on as described in the "Turning the Iron On and Off" section. • Select the desired temperature by pressing the Temperature UP (+) and Temperature DOWN (-) buttons on either side of the LCD Display. An audible beep will sound each time the temperature is changed. • A minimum temperature setting of 160º C is required for steam ironing. • To activate, press the Steam Adjust Button located above the LCD Display to activate the steam setting . An audible beep will sound. 8