Singer M2100 User Manual - Page 14
Winding the Bobbin - tension
View all Singer M2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Threading the Machine a Winding the Bobbin -- Place the thread and spool pin felt (a) onto the spool pin. (1) -- Draw the thread from the spool through the upper thread guide. (2) -- Wind the thread clockwise around bobbin winder tension discs. (3) -- Thread bobbin as illustrated and place on spindle. (4) -- Push bobbin spindle to right. (5) -- Hold thread end. (6) -- Step on foot control pedal. (7) -- Release the pedal after a few turns. Release the thread and cut as close as possible to the spool. Press the pedal again. Once the spool is full, it rotates slowly. Release the pedal and cut thread. (8) -- Push bobbin spindle to left (9) and remove. Please Note: When the bobbin winder spindle is in "bobbin winding" position, the machine will not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the left (sewing position). 6