Singer M2100 User Manual - Page 16
Threading the Upper Thread
View all Singer M2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Threading the Upper Thread This is a simple operation but it is important to carry out correctly as by not doing so several sewing problems could result. -- Raise the needle to its highest position by turning the handwheel towards you (counterclockwise) so that the mark on the handwheel points directly up. Raise the presser foot to release the tension discs. (1) -- Place the thread and spool pin felt (a) onto the spool pin. (2) Note: For safety, it is strongly suggested you turn off the power before threading. -- Draw the thread from the spool through the upper thread guide. (3) -- Guide the thread around the thread guide as illustrated. (4) -- Thread tension module by leading thread down right channel and up left channel. (5) During this process it is helpful to hold the thread between the spool and thread guide. -- At the top of this movement pass thread from right to left through the slotted eye of the take-up lever and then downwards again. (6) -- Now pass thread behind the thin wire needle clamp guide (7) and then down to the needle which should be threaded from front to back. -- Pull about 6-8 inches of thread to the rear beyond the needle eye. Trim thread to length with built in thread cutter. (8) 8