Singer One Instruction Manual 2 - Page 20
understand
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
18 To Remove the Bobbin Draw to the left the slide in the bed of the machine and take out the bobbin with the thumb and forefinger of the left hand, as shown in Fig. 16. • FIG. 16. REMOVING THE BOBBIN To Wind the Bobbin It ;s necessary to understand the stop motion (B, Fig. 17) by which the balance wheel (C, Fig. 17) can be released when required, thus permitting the winding of bobbins without running the stitching mechanism. To release the balance wheel (C, Fig. 17) turn the stop motion screw (B, Fig. 17) over toward you. It is necessary to hold the balance wheel while loosening the stop motion screw. Place the bobbin on the bobbin winder spindle (E, Fig. 17) and push it up closely against the shoulder having the small pin in the shoulder enter the hole in the side of the bobbin. Put the spool of thread on the spool pin (1, Fig. 17) located on the bed of the machine at the right. Draw the thread under and between the tension discs (2, Fig. 17) on the bed of the machine at the right of the spool pin, then pass the thread through the hole in the left side of the bobbin (3, Fig. 17) from the inside.