Singer S900 INSPIRATION Instruction Manual 2 - Page 12
satisfactorily
View all Singer S900 INSPIRATION manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ADJUSTING PRESSURE AND FEEDING OF FABRIC General Sewing. Usually for normal sewing the pressure bar cap or darner release, (B, Fig. 17) is at its lowest position and the drop feed knob is turned to " " position, (Fig. 18). Sewing Thin or Light Weight Fabrics. When lighter pressure is required to sew satisfactorily on thin silk or flimsy material, the pressure cap should be about halfway down. Release all the way by pressing the snap lock, (A, Fig. 17) and then press cap (B) down again to halfway spot. Darning and Mending. In order to move the fabric freely in any direction for darning and mending, release the pressure cap (B, Fig. 17) completely by pressing down on the snap lock, (A, Fig. 17) Turn drop feed control (Fig. 18) to DOWN" position. This will drop the feed well below the •needle plate. To return feed to normal position, turn knob to C DOWN" position. ii. El g. 18