Singer S900 INSPIRATION Instruction Manual 2 - Page 33
the balance
View all Singer S900 INSPIRATION manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
32 4. Clean the shuttle race, the shuttle and shuttle race cover by removing all threads, lint, etc. 5. Apply a drop of oil with finger tip to outer edge of shuttle. When the cleaning has been completed, proceed as follows to replace the shuttle assembly: 1. Turn the balance wheel until the needle reaches its highest position. 2. Place shuttle body, (D), against shuttle driver and adjust into position. 3. Replace shuttle race cover, (C), fitting pin at lower edge into notch, and lock into position with shuttle race cover clamps, (B), making certain the clamps have been snapped securely into position. 4. Put bobbin into bobbin case. CARE AND MAINTENANCE OF YOUR MACHINE How to Oil Your Machine your machine should be oiled occasionally to keep it operating smoothly, how often depends on the amount of sewing you do. . . . Before oiling the upper part of the sewing unit at points indicated by arrows in Fig. 49 turn hand wheel toward you until the take-up lever is at its lowest point. -. . - Fig. 49