Singer SEQS-6700 FUTURA QUARTET Instruction Manual - Page 57
Performance Checklist
View all Singer SEQS-6700 FUTURA QUARTET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
PERFORMANCE CHECKLIST GENERAL PROBLEMS Machine does not sew. * Power switch is turned off.- Turn on the switch. (see page 4). * Buttonhole lever is not raised when sewing stitch patterns. - Raise buttonhole lever. (see page 28 - 29). * Buttonhole lever is not lowered when sewing buttonhole. - Lower buttonhole lever. (see page 28 - 29). Machine jams/knocks. * Thread is caught in hook. - Clean hook. (see page 40). * Needle is damaged. - Replace needle. (see page 10). Fabric does not move. * Presser foot is not lowered - Lower presser foot. (see page 54). * Stitch length is too short - Lengthen stitch length. (see page 12 - 13). * Feed dogs are lowered - Raise feed dogs. (see page 54). STITCHING PROBLEMS Machine skips stitches. * Needle is not all the way up into needle clamp. (see page 10). * Needle is bent or blunt. - Replace needle. (see page 10). * Machine is not threaded correctly. (see page 7 - 9). * Thread is caught in hook. - Clean hook. (see page 40). Stitches are irregular. * Needle size is not correct for thread and fabric. (see page 10). * Machine is not threaded correctly. - (see page 7 - 9). * Top thread tension is too loose. (see page 11). * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Bobbin has not been wound evenly. - Rewind bobbin. (see page 5). Needle breaks. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Needle size is not correct for thread and fabric. (see page 10). * Needle is not all the way up into the needle clamp. (see page 10). THREAD PROBLEMS Needle thread breaks. * Machine is not threaded correctly. (see page 7 - 9). * Top thread tension is too tight. (see page 11). * Needle is bent. - Replace needle. (see page 10). * Needle size is not correct for thread and fabric. (see page 10). Bobbin thread breaks. * Bobbin case is not threaded correctly. (see page 6). * Lint accumulates in bobbin case or hook. - Remove lint (see page 40). Fabric puckers. * Top thread tension is too tight. - Adjust thread tension. (see page 11). * Stitch length is too long for sheer or soft fabric. - Shorten stitch length. (see page 12 - 13). 55