Singer SES2000 FUTURA Instruction Manual - Page 108
Performance Checklist
View all Singer SES2000 FUTURA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
PERFORMANCE CHECKLIST GENERAL PROBLEMS Machine does not sew. * Power switch is turned off.- Turn on the switch (see page 10 - 11). * Buttonhole lever is not raised when sewing stitch patterns. - Raise buttonhole lever (see page 60 - 63). * Buttonhole lever is not lowered when sewing buttonhole. - Lower buttonhole lever (see page 60 - 63). Machine jams/knocks. * Thread is caught in hook. - Clean hook (see page 110 - 111). * Needle is damaged. - Replace needle (see page 106 - 107). Fabric does not move. * Presser foot is not lowered - Lower presser foot (see page 100 - 101). * Stitch length is too short - Lengthen stitch length (see page 22 - 25). * Feed dogs are lowered - Raise feed dogs (see page 100 - 101). STITCHING PROBLEMS Machine skips stitches. * Needle is not all the way up into needle clamp. - See page 106 - 107. * Needle is bent or blunt. - Replace needle (see page 106 - 107). * Machine is not threaded correctly. - See page 18 - 21. * Thread is caught in hook. - Clean hook (see page 110 - 111). Stitches are irregular. * Needle size is not correct for thread and fabric. - See page 106 - 107. * Machine is not threaded correctly. - See page 18 - 21. * Top thread tension is too loose. - See page 102 - 103. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Bobbin has not been wound evenly. - Rewind bobbin (see page 14 - 15). Needle breaks. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Needle size is not correct for thread and fabric. - See page 106 - 107. * Needle is not all the way up into the needle clamp. - See page 106 - 107. THREAD PROBLEMS Needle thread breaks. * Machine is not threaded correctly. - See page 18 - 21. * Top thread tension is too tight. - See page 102 - 103. * Needle is bent. - Replace needle (see page 106 - 107). * Needle size is not correct for thread and fabric - See page 106 - 107. Bobbin thread breaks. * Bobbin case is not threaded correctly. - See page 16 - 17. * Lint accumulates in bobbin case or hook. - Remove lint (see page 110 - 111). Fabric puckers. * Top thread tension is too tight. - Adjust thread tension (see page 102 - 103). * Stitch length is too long for sheer or soft fabric. - Shorten stitch length (see page 22 - 25). 108