Smeg BCC01BLMUS User manual - Page 10
USE Fig. E-F-G-H
View all Smeg BCC01BLMUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Use USE (Fig. E-F-G-H) • Lift the lid (4) and insert cold water into the tank (5) taking care not to exceed the 'Max' level indicated, then refit the lid (4). • Lift the lid (2) and insert coffee beans into the container (3). • Check that the drip tray (14) is correctly positioned. • Press the button (9) , the machine starts the heating phase and the keys light up flashing in sequence. At the end of the heating, a self-cleaning cycle of the internal circuits is carried out and, once the cycle is finished, the machine is ready to be used. At the first use it is recommended to make at least one coffee to make a complete break-in of all the circuits. After 20 minutes of non-use, the machine switches off. If it has made at least one coffee, it performs a self-cleaning cycle. Press the button (9) to switch on the machine. Change of dispensing program The machine has two dispensing menus in its memory: Primary and Secondary. To switch from one program to another, press the key(20) . In the Primary menu all the keys are illuminated in white, in the Secondary menu, all the keys are illuminated in orange. For the specific functions of each menu, refer to the paragraph "DESCRIPTION OF CONTROLS AND ALARMS" Turning off the machine the setting of the Primary or Secondary dispensing menu remains in the memory at the next restart. EN - 10 Dispensing a drink • It is possible to adjust the position of the dispenser (11) according to the cup used. For very high cups it is possible to remove the drip tray (14). • Place a cup or large cup under the dispenser. • Press the key for the desired function. For each selected function, preparation stops automatically. For specific functions, refer to the paragraph "DESCRIPTION OF CONTROLS AND ALARMS". • At the end of dispensing, all the keys light up fixed. Dispensing can be stopped at any time by pressing the dispensing key again. Remember to reassemble the tray (14) at the end of any dispensing. It is completely normal that after a prolonged inactivity of the machine (breaks longer than 20 min) the first coffees are not at the right temperature. The tips to obtain a hot coffee immediately are given in the section "What to do if..." Customization of the quantity It is possible to customize, for each type of dispensing, the quantity of coffee or water dispensed. • Place a cup or large cup under the dispenser. • Press for at least 3 seconds one of the keys relative to the drink to be dispensed. The selected key lights up flashing; the machine emits a double sound to signal the modification of the preset program. • On reaching the desired quantity, stop dispensing by pressing the key again; an acoustic signal indicates the memorization of the quantity.