Smeg BCC01BLMUS User manual - Page 12
Use / Cleaning and maintenance
View all Smeg BCC01BLMUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Use / Cleaning and maintenance CLEANING AND MAINTENANCE (Fig. C-E-G-H-I-L) Manual rinse • Make sure that the Primary program is selected with keys (16), (17), (18), (19) illuminated in white. • With the machine ready to dispense and the drip tray mounted, press the keys (20) and (19) simultaneously for at least 3 seconds: the machine will rinse the coffee circuit (coffee dispenser 11). • At the end of the washing cycle, the keys light up steadily. Cleaning of the machine body For a good preservation of the external surfaces it is necessary to clean them regularly at the end of each use, after letting them cool. Clean with a soft cloth dampened with water. Never immerse the machine body (1) in water or other liquids. Allow the machine to cool down before cleaning. Cleaning the external drip tray (14) The drip tray (14) is equipped with a red float (27) which protrudes from the cup-holder grid as soon as the maximum liquid level is exceeded. • Remove the tray (14) and the cup-holder grid (28) and empty it. • Clean the tray (14) and the grid (28) in running water with neutral dish detergent. • Dry the components and reassemble them in the machine. EN - 12 Cleaning the coffee grounds container (12) and internal tray (13) Always empty the coffee grounds container with the appliance switched on. This is the only way of resetting the coffee grounds counter. • Remove the tray (14). • Remove the grounds container (12) with its tray (13) by pulling it outwards. • Empty the coffee grounds from the container (12). • Clean the container (12) and the tray (13) in running water with neutral dish detergent. • Dry the components and reassemble them in the machine. Daily cleaning of the coffee grounds container and internal tray is recommended. Cleaning the water tank (5) • Remove the lid (4) and remove the tank (5) from the machine using the appropriate handle. • Clean the tank (5) in running water with neutral dish detergent and reassemble it in the machine. Cleaning the brewing group (15) Before performing this cleaning operation, ALWAYS disconnect the plug from the power outlet. • Press the door (8) in the lower part until it releases then remove it from the upper part. • Press the two release clips (29) located on the sides of the infuser (15) and remove it from the machine (Fig.L). • Wash the brew group (15) with running water, dry it and reassemble it in the machine, making sure it is positioned correctly.