Smeg CPF36UGMYW Instruction Manual 2 - Page 4

Electrical Code, C22.11 - 1

Page 4 highlights

Important Safety Instructions WARNING To reduce the risk of fire, electrical shock, personal injury, or damage when using the range, follow basic safety precautions, including the following: WARNING PRIMARY FASTENING SYSTEM: Visually check that the wall-mounted brackets are inserted into the appropriate lateral hooks (on both sides). SECONDARY FASTENING SYSTEM: Visually check from the inside of the drawer that the floor-mounted bracket is inserted into the appropriate lateral hooks (left or right). • Read all instructions • Proper installation is your responsibility. Have a qualified technician install and ground this appliance in accordance with these installation instructions. • It is the responsibility of the installer to comply with installation information specified on the model/serial ID plate. The ID Plates are visibly located on the back of the appliance and on the oven door frame. These ID plates must never be removed. CAUTION: To eliminate the risk of burns or fire caused by reaching over hot surface burners, do not store items directly above the rangetop. • ELECTRICAL GROUNDING REQUIRED: See the "Electrical Requirements" section. It is the customer's responsibility: • To contact a qualified electrician to install the appliance • To ensure that the electrical system is adequate and conforms with the national ANSI / NFPA 70 ELECTRICAL CODE - latest edition - Or the CANADIAN ELECTRICAL CODE, C22.11 - 1 and C22.2 No. 01982 - or latest edition - and all local codes and ordinances. IMPORTANT: Observe all codes and ordinances in force. • Before you plug the electrical cord into an outlet, make sure that all the appliance controls are in the OFF position. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Important Safety Instructions
6
Read all instructions
Proper installation is your responsibility.
Have a qualified technician install and
ground this appliance in accordance
with these installation instructions.
It is the responsibility of the installer to
comply with installation information
specified on the model/serial ID plate.
The ID Plates are visibly located on the
back of the appliance and on the oven
door frame. These ID plates must never
be removed.
ELECTRICAL GROUNDING
REQUIRED: See the “Electrical
Requirements” section. It is the customer’s
responsibility:
To contact a qualified electrician to
install the appliance
To ensure that the electrical system is
adequate and conforms with the national
ANSI / NFPA 70 ELECTRICAL CODE –
latest edition – Or the CANADIAN
ELECTRICAL CODE, C22.11 – 1 and
C22.2 No. 01982 – or latest edition –
and all local codes and ordinances.
IMPORTANT: Observe all codes and
ordinances in force.
Before you plug the electrical cord into
an outlet, make sure that all the
appliance controls are in the OFF
position.
WARNING
To reduce the risk of fire, electrical shock, personal injury, or
damage when using the range, follow basic safety precautions,
including the following:
WARNING
PRIMARY FASTENING SYSTEM:
Visually check that the wall-mounted brackets are inserted into the
appropriate lateral hooks (on both sides).
SECONDARY FASTENING SYSTEM:
Visually check from the inside of the drawer that the floor-mounted
bracket is inserted into the appropriate lateral hooks (left or right).
CAUTION
: To eliminate the risk of
burns or fire caused by reaching
over hot surface burners, do not
store items directly above the
rangetop.