Smeg CVIU338LX Instruction Manual 1 - Page 25

EN Cleaning and maintenance 5 Installation 5.1 Electrical connection DANGER • The ground connection must be completed in the manner indicated in the regulations on electric installations. • Never pull the cord to unplug it. General information • Check that the characteristics of the electricity grid comply with the information shown on the identification plate. The identification plate containing technical data, the serial number, and brand name of the appliance is visibly located on the appliance. The identification plate should never be removed. • Check that the plug and socket are of the same type. • Avoid the use of transformers, adapters or shunts as these could cause overheating or burns. • The plug must always be accessible when the appliance is installed. • Before turning the appliance on for the first time, leave it in an upright position for at least 2 hours. • If it is necessary to replace the power supply cable, the operation must be performed only by an authorized technician of the Technical Support Service. 5.2 Positioning WARNING • Move the appliance into the desired position with the help of a second person. CAUTION • Do not use the open door as a lever to move the appliance into place. • Do not apply excessive pressure to the door when it is open. • The appliance must not be exposed to sunlight. • The appliance must not be placed near heat sources. If this is not possible, a suitable insulation panel must be used. • Do not place the appliance outdoors. Choice of position The appliance must be placed in a dry place with sufficient air circulation. Depending on the climatic class to which it belongs (indicated on the identification plate applied inside the compartment), the appliance can be used in different temperature conditions. 27