Smeg CVIU338RX1 Instruction manual - Page 10

Manual ventilation The fans switch on and off automatically to guarantee a constant temperature and provide suitable climate control for conservation of the wine. If increasing the level of humidity inside the wine cellars is necessary, you can activate the manual ventilation mode. The manual ventilation mode forces the continuous operation of the fan. If the manual ventilation mode is deactivated, the fan goes back to the standard automatic operation. Select this option occasionally in order to prevent corks from drying out when bottles are stored for long periods. To activate/deactivate manual ventilation mode, press the fan key . If manual ventilation is activated, the energy consumption will be higher. Keylock This function prevents the appliance functions from being accidentally switched on/off. To activate/deactivate the Keylock hold down the Keylock control key for a few seconds. Demo mode (for showrooms only) Turns off the appliance's fans and compressor while keeping the control panel active. To activate demo mode: 1. press and hold the fan and Keylock control keys simultaneously for a few seconds. The text display; will appear on the 2. press the fan key. The text will appear on the display. 3. after a few seconds, without any key being pressed, the selection is stored. To deactivate demo mode: 4. press and hold the fan and Keylock control keys simultaneously for a few seconds. The text display; will appear on the 5. press the fan key. The text will appear on the display. When demo mode is active, the display will show the message for 2 seconds every 2 minutes. In demo mode, forced lighting will have no time limit for switching off. Temperature format change (on some models only) Allows the temperature scale to be set in either degrees Fahrenheit (°F) or degrees Celsius (°C). To change the temperature display format: 1. hold down the Fan button and the Temperature Increase button simultaneously for a few seconds. The display reads . 2. Press the fan button . The display reads . 3. after a few seconds have passed without any button being pressed, the selection is memorized. To return to the previous format: 4. hold down the Fan button and the Command Lock button simultaneously for a few seconds. The display reads ; 5. Press the fan button . The display reads . 12 - USE 91477A923/A