Smeg KLF04RDUS User manual - Page 14
Keep Warm function
View all Smeg KLF04RDUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Use 10. Pick up the kettle by the handle and pour the hot water into the desired recipient (cups, teapot, etc.). 11. If no command is given within 60 seconds, the kettle will enter Stand-by mode (all LEDs off). Pressing any key will reactivate the kettle, placing it in Temperature SELECTION mode, starting from the last temperature set. Now follow the operations from point 7 onwards in section "3 Use". 3.3 Keep Warm function This function allows you to keep the water in the kettle at the selected temperature for a maximum of 20 minutes. This function can be activated at any moment during the heating cycle by pressing the Keep Warm key (the corresponding LED turns on to confirm the selection). Pressing the key again exits then Keep Warm function and the LED will turn off. After 20 minutes have passed, the kettle enters Stand-by mode. Danger of burns • Wait a few seconds from when the kettle boils, then pour the water out slowly to prevent it spraying or coming out too fast. • Do not fill the kettle beyond the maximum level (1.7 liters/7 cups) to avoid the risk of burns when pouring. • Do not tilt the hot kettle excessively - the boiling water could spray out, with a risk of burns. • Keep your face at a safe distance from the lid to avoid the risk of burns from escaping steam. 16