Home » Smeg Manuals » Range Hoods » Smeg KSEU912X » Manual Viewer

Smeg KSEU912X User Guide - Page 8

National Fire Protection Association One Batterymarch Park, Quincy, Massachusetts 02269

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Instructions for the Installer 3.2.1 Recommended Grounding Method For your personal safety, this cooktop must be grounded. This cooktop is equipped with a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong ground-type outlet, grounded in accordance with the National ANSI/NFPA 70 Electrical Code (latest edition*) or the Canadian Electrical Code (CSA)** and local codes and ordinances. lf a mating outlet is not available, it is the personal responsibility and obligation of the customer to have a properly polarized and grounded, 3-prong outlet installed by a qualified electrician. Copies of the standards listed above may be obtained from: * National Fire Protection Association One Batterymarch Park, Quincy, Massachusetts 02269 ** CSA International 850,1 East Pleasant Valley Rd., Cleveland OH 44131-5575 10

Section	Page
Important safety instructions	2
2. COOKTOP MEASUREMENTS	3
3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS	4
1 Remove all packaging parts (e.g. crate, carton, polystyrene and metal hooks). Do not eliminate this manual as it is an integral part of the appliance and it should be kept handy for easy reference whenever needed.	4
2 Temporarily remove all removable parts from the cooktop that could fall and cause personal injury or damage to objects (burners, crowns and flame caps) during the attachment procedures These parts must be refitted before using the appliance.	4
3.1 Gas supply requirements	6
3.2 Electrical requirements	7
3.2.1 Recommended Grounding Method	8
4. INSTALLING THE COOKTOP	9
1 Unscrew cap A on the pressure regulator	9
2 Turn it to the part where LP is printed	9
3 Re-tighten it and lock the pins in the slots provided.	9
4 There is an arrow printed on the back of the energy regulator. The tip of the arrow indicates the end to be connected to the cooktop connector.	9
5. CHECKING OPERATION	12
1 a spark must light on all burners when the knobs on the top are pressed	12
2 when each knob on the cooktop is pressed and turned to the low flame symbol ( ), the entire crown should light.	12
3 lf burners do not light properly, turn the control knob to the \	12

Match case Limit results 1 per page

Instructions for the Installer

3.2.1

Recommended Grounding Method

For your personal safety, this cooktop must be grounded. This cooktop is equipped with a 3-prong

ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong

ground-type outlet, grounded in accordance with the National ANSI/NFPA 70 Electrical Code (latest

edition*) or the Canadian Electrical Code (CSA)** and local codes and ordinances. lf a mating outlet is

not available, it is the personal responsibility and obligation of the customer to have a properly polarized

and grounded, 3-prong outlet installed by a qualified electrician.

Copies of the standards listed above may be obtained from:

* National Fire Protection Association One Batterymarch Park, Quincy, Massachusetts 02269

** CSA International 850,1 East Pleasant Valley Rd., Cleveland OH 44131-5575