Smeg KSEU912X User Guide - Page 9
Installing The Cooktop
View all Smeg KSEU912X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Instructions for the Installer 4. INSTALLING THE COOKTOP 1) Remove the polystyrene support and lift the hob to extract it from the side supports and the box. Connection to the gas mains may be made with a flexible metal pipe and conforming to the provisions defined by current standard regulations in force. USE A SOAPY SOLUTION TO CHECK FOR PROPER TIGHTNESS. NEVER USE A FLAME. Leak testing of the appliance shall be conducted according to the manufacturer's instructions. 2) The following procedures must be performed to adjust the gas supply pressure for LP operation of the cooktop: 1 Unscrew cap A on the pressure regulator 2 Turn it to the part where LP is printed 3 Re-tighten it and lock the pins in the slots provided. 4 There is an arrow printed on the back of the energy regulator. The tip of the arrow indicates the end to be connected to the cooktop connector. 11