Snapper CP2155HV Operater's Manual - Page 11

Operation Operation (Continued) ! WARNING ! DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Installing the Grass Bag Adapter (Continued) Installing the Recycling Plug 1. Install the recycling plug (A, Figure 13) if recycling is desired after the bag adapter is installed. Install the recycling plug completely and securely into the bag adapter (B). IMPORTANT: Install the grass bag as a safeguard. 4. Route the recoil rope around the outside of the rope A guide pulley (A, Figure 12). Note: The recoil rope may need to be slackened. Refer to the section entitled "Handle Assembly". B A Figure 12: Rope guide pulley Figure 13: Installing the recycling plug 2. Refer to the section entitled "Recycling Operation". ! WARNING ! DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately. 9