Snapper SPV2270HW Operater's Manual - Page 21
Preparing the Mower for Storage
View all Snapper SPV2270HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
WARNING: Do not attempt mowing operations while using the washout port. WARNING: Do not attempt to look under or reach under the mower housing for any reason while using the washout port. Serious injury can result. Maintenance A Figure 20: Washout port for tion Preparing the Mower for Storage WARNING: Do not remove gasoline while t c inside a building, near a fire, or while you smoke. Gasoline fumes can cause an o u explosion or a fire. N d 1. Drain the fuel tank. o 2. Let the engine run until it is out of gasoline. r 3. Drain the oil from the warm engine. Fill the engine crankcase with new oil. p 4. Remove the spark plug from the cylinder. Pour one ounce of oil into the cylinder. Slowly pull the recoile start grip so that the oil will protect the cylinder. R Install a new spark plug in the cylinder. 5. Clean the dirt and debris from the cylinder cooling fins and the engine housing. 6. Clean the bottom of the mower housing. 7. Make sure the grass bag is empty of grass. Grass remaining in the bag during storage will damage the bag. 8. Completely clean the mower to protect the paint. 9. Fold the handles (if desired). CAUTION: Be careful when you fold or raise the handle. Do not damage the cables. A cable that is bent will not work correctly. Before you use the unit, replace a bent or damaged cable. 10. Put the unit in a building that has good ventilation. en 21