Sony Ericsson P900 User Guide - Page 147

This is the Internet version of the user's guide. © Print only for private use. Security On the Settings tab you can set the Bluetooth security related settings of your P900. Bluetooth on Visible to other devices All Bluetooth wireless technology functionality from your P900 works. Visibility according to the Visible to other devices setting. Set Bluetooth to Off if you do not use Bluetooth, it will decrease battery drain. Bluetooth will automatically switch on if you use Send as > Bluetooth from the applications Yes: All Bluetooth wireless technology functionality from your P900 works. No: All Bluetooth wireless technology functionality from your P900 works but you cannot receive beamed items, and other devices cannot initiate pairing with your P900. You cannot use your P900 as a modem, it is not possible to connect from a PC and voice dialling from a headset is not possible. • Set the baud rate, parity, number of stop bits, character length and type of flow control required for the connection. When connecting your P900 via the desk stand to a USB port on your PC, use the following (default) settings: Baud rate Parity Stop bits Character length Flow control 460800 None 1 8 CTS/RTS Tip You can set the cable connection mode when the Flip is closed by selecting Applications > Connections > Cable. Cable Use Cable to set the cable connection mode and the connection parameters used when communicating through your P900's cable port. • Set the cable connection mode. Please note that you must set the mode to Modem when using the P900 as a modem and when using the DUN (Dial-up Networking) Wizard. Control panel 147