Sony ACDN10 Operation Manual - Page 33
Specifications
View all Sony ACDN10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Specifications General Voltage source 100-240V AC, 50/60 Hz Current drain 168 VA or less Peak inrush current (1) Power ON, current probe method: 20 A (100 V)/60 A (240 V) (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 25 A (230 V) Operating temperature 0°C to 45°C (32°F to 113°F) Mass Approx. 850 g (1 lb 14 oz) Dimensions 101 × 169 × 48 mm (4 × 6 3/4 × 1 /15 16 inches) (w/h/d) (excluding projecting parts) Input/output Current input (AC) 144 VA or less (on regulation) Power output (DC) 100 W at maximum Voltage output (DC) 16.7 V Current output (DC) 6 A at maximum DC output connector Square-shaped 5-pin connector XLR-type 4-pin connector 16.7 V, 6 A Battery charging connector (DC) Square-shaped 5-pin connector 16.8 V, 5 A/3 A Supplied accessories Operation Manual (1) AC power cord (angle type) (1) Optional accessory DC power cord Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. 15 (E)