Sony AITE200ULSBK Operating Instructions - Page 17

Option Switches (DIP Switch) Remove the two slotted screws by using a slotted screwdriver. Remove the access cover to change the DIP switch settings. (Refer to the following figure for details changing the DIP switch settings.) After changing the DIP switch settings, replace access cover and tighten the two slotted screws using a slotted screwdriver. DIP Switch Access CAUTION Before removing the access cover to change DIP switch settings on the drive, turn off the computer and disconnect the power cord from the unit. Once the DIP switch settings have been changed, replace the access cover using the two original slotted screws provided. Access Cover DIP Switch Slotted Screws DIP Switch Positions Default ON OFF 12345678 1 Drive Mode (OFF) 2 Drive Mode (OFF) 3 Drive Mode (OFF) 4 Drive Mode (OFF) 5 Reserved (OFF) 6 Periodic Cleaning Req (OFF) 7 DC Control (1) (ON) 8 DC Control (2) (OFF) 17 Chapter 2 Preparation