Sony BDP-S1000ES Operating Instructions - Page 72
Self-Diagnosis Function, Wireless LAN
UPC - 027242765788
View all Sony BDP-S1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5When "WAIT" appears in the front panel display, hold down [/1 on the player for more than 10 seconds until the player turns on again. , Depending on the surrounding environment such as the wall material, radio wave receiving condition, or obstacles between the player and the wireless LAN router (access point), the communication distance may be shortened. Move the player and the wireless LAN router (access point) closer to each other. , Devices that use a 2.4 GHz frequency band such as a microwave, Bluetooth, or digital cordless device may interrupt the communication. Move the player away from such devices, or turn off such devices. The player does not respond to any button. , Moisture has condensed inside the player (page 3). , Hold down [/1 on the player for more than 10 seconds until the indicators in the front panel display turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. The wireless LAN router (access point) is not displayed on "Access point scan" list. , The wireless LAN router (access point) is not displayed if you set the SSID to hide with the wireless LAN router (access point). Check and reset the SSID of the wireless LAN router (access point) manually (page 62). Wireless LAN You cannot connect your PC to the Internet after you set the "Setting wireless LAN (Automatic registration (WPS))" settings. , The wireless settings of the wireless LAN router (access point) may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the wireless LAN router (access point). In this case, check the wireless settings of the wireless LAN router (access point), and change the wireless settings of your PC accordingly. For details, refer to the instruction manual supplied with the wireless LAN router (access point). You cannot connect the player to the wireless LAN router (access point). , Check if the wireless LAN router (access point) is on. Self-Diagnosis Function When the self-diagnosis function is activated to prevent the player from malfunctioning, an error code appears in the front panel display, or just appears without any messages on the entire screen. In these cases, check the following. When an error code appears in the front panel display Error code Exxxx SYS ERR VUP NG FAN ERR Corrective action Contact your nearest Sony dealer or local authorized Sony service facility and give the error code. • Check that the ventilation holes on the rear of the player are not blocked. • Place the player in a location with adequate ventilation to prevent heat build-up in the player. When just appears without any messages on the entire screen Contact your nearest Sony dealer or local authorized Sony service facility. 72