Sony BDP-S270 Operating Instructions - Page 29

Network connection, BRAVIA Sync Control for, Others, work BRAVIA Sync. - instruction

Page 29 highlights

Additional Information Network connection Others The player cannot connect to the network. , Check the network connection (page 14) and the network settings (page 26). The message "A new software version has been found on the network. Perform update under "Network Update."" appears on the screen when turning the player on. , See "Network Update" (page 21) to update the player to a newer software version. BRAVIA Sync ("Control for HDMI") The "Control for HDMI" function does not work (BRAVIA Sync). , Check that "Control for HDMI" is set to "On" (page 25). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 25). , Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the "Control for HDMI" function. - the connected component's setting for the "Control for HDMI" function is correct. , When you connect the player to a TV through an AV amplifier (receiver), - if the AV amplifier (receiver) is not compatible with the "Control for HDMI" function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 25). Refer to the instruction manual supplied with the AV amplifier (receiver). Playback does not start from the beginning of content. , Press OPTIONS, and select "Play from beginning." Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory depending on the disc when - you open the disc tray. - you disconnect the USB device. - you play other content. - you turn off the player. The disc tray does not open and "LOCKED" or "TLK ON" appears on the front panel display. , When "LOCKED" appears, the player is locked. To cancel the Child Lock, hold down N on the player until "UNLOCK" appears on the front panel display (page 8). , When "TLK ON" appears, contact your Sony dealer or local authorized Sony service facility. The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5When "WAIT" appears on the front panel display, hold down [/1 on the player for more than 10 seconds until the player turns on again. "Exxxxx" or "FAN ERR" appears on the front panel display. , When "Exxxxx" appears, contact your nearest Sony dealer or local authorized Sony service facility and give the error code. ,continued 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

29
Additional Information
The player cannot connect to the network.
,
Check the network connection (page 14)
and the network settings (page 26).
The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
,
See “Network Update” (page 21) to update
the player to a newer software version.
The “Control for HDMI” function does not
work (BRAVIA Sync).
,
Check that “Control for HDMI” is set to
“On” (page 25).
,
If you change the HDMI connection, turn
the player off and on again.
,
If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 25).
,
Check the following and refer to the
instruction manual supplied with the
component.
the connected component is compatible
with the “Control for HDMI” function.
the connected component’s setting for
the “Control for HDMI” function is
correct.
,
When you connect the player to a TV
through an AV amplifier (receiver),
if the AV amplifier (receiver) is not
compatible with the “Control for HDMI”
function, you may be unable to control
the TV from the player.
if you change the HDMI connection,
disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following:
1
Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.
2
Set “Control for HDMI” to
“Off,” then set “Control for HDMI” to
“On” (page 25). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
Playback does not start from the
beginning of content.
,
Press OPTIONS, and select “Play from
beginning.”
Playback does not start from the resume
point where you last stopped playing.
,
The resume point may be cleared from
memory depending on the disc when
you open the disc tray.
you disconnect the USB device.
you play other content.
you turn off the player.
The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.
,
When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down
N
on the player until “UNLOCK”
appears on the front panel display (page 8).
,
When “TLK ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press
Z
.
,
Try the following:
1
Turn the player off,
and disconnect the AC power cord.
2
Reconnect the AC power cord while
pressing down
Z
on the player.
3
Keep
pressing down
Z
on the player until the tray
opens.
4
Remove the disc.
5
When
“WAIT” appears on the front panel display,
hold down
[
/
1
on the player for more than
10 seconds until the player turns on again.
“Exxxxx” or “FAN ERR” appears on the
front panel display.
,
When “Exxxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
Network connection
BRAVIA Sync (“Control for
HDMI”)
Others
,
continued