Sony BDV-E3100 Operating Instructions - Page 48
[Audio Settings], Pause Mode] BD/DVD VIDEO, DVD-R/DVD-RW only, BD Audio MIX Setting], Audio DRC] - subwoofer
View all Sony BDV-E3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
x [Pause Mode] (BD/DVD VIDEO/ DVD-R/DVD-RW only) [Auto]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [Frame]: The picture, including subjects that do not move dynamically, is output in high resolution. [Audio Settings] x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only. x [Audio DRC] You can compress the dynamic range of the sound track. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [Off]: No compression of dynamic range. x [Attenuate - AUDIO] Distortion may occur when you listen to an equipment connected to the AUDIO IN (L/R) jacks. You can prevent distortion by attenuating the input level on the unit. [On]: Attenuates the input level. The output level will decrease at this setting. [Off]: Normal input level. x [Audio Output] You can select the output method where the audio signal is output. [Speaker]: Outputs multi-channel sound from the system's speakers only. [Speaker + HDMI]: Outputs multi-channel sound from the system's speakers and 2-channel linear PCM signals from the HDMI (OUT) jack. [HDMI]: Outputs sound from the HDMI (OUT) jack only. Sound format depends on the connected equipment. Note • When [Control for HDMI] is set to [On] (page 50), [Audio Output] is set to [Speaker + HDMI] automatically and this setting cannot be changed. • When [Audio Output] is set to [HDMI], the output signal format for the "TV" function is 2-channel linear PCM. x [Sound Effect] You can turn on or off the system's sound effects (SOUND MODE setting (page 24)). For a 2-channel source, you can select [Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] to simulate surround sound. [Sound Mode On]: Enables the surround effect of the sound mode (page 24) and Football mode (page 25). [Dolby Pro Logic]: The system simulates surround sound from 2-channel sources and outputs sound from all speakers (5.1 channel) (Dolby Pro Logic decoding). [DTS Neo:6 Cinema]/[DTS Neo:6 Music]: The system simulates surround sound from 2-channel sources and produces multichannel sound (DTS Neo:6 Cinema/DTS Neo:6 Music mode decoding). [2ch Stereo]: This system outputs the sound from the front left/right speakers and subwoofer only. Multi-channel surround formats are downmixed to 2-channel. 48US