Sony BDV-E980W Operating Instructions - Page 29

Getting Started Step 5: Performing the Easy Setup Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model. 123 456 789 0 "/1 C/X/x/c, HOME 1 Turn on the TV. 2 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. 3 Press [/1. 4 Switch the input selector on your TV so that the signal from the system appears on the TV screen. The Easy Setup Display for OSD language selection appears. 5 Perform the [Easy Setup]. Follow the on-screen instructions to make the basic settings using C/X/x/c, and . Depending on the connection method (page 22), perform the following setting. • HDMI cable connection: Follow the instructions that are displayed on the TV screen. • Component video cable connection: Select the picture quality. The available settings are as follows, from lowest to highest picture quality: 480i*, 480p**, 720p, and 1080i. * 480i/576i for Mexican and Latin American models. ** 480p/576p for Mexican and Latin American models. • BD-ROM playback of protected content via component video output is only supported at 480i* output resolution. For details, see "Copy Protection" (page 4). * 480i/576i for Mexican and Latin American models. • Video cord connection: Select [16:9] or [4:3] so that the picture is displayed correctly. For details about [Auto Calibration] settings in [Easy Setup], see "Calibrating the Appropriate Settings Automatically" (page 48). To recall the Easy Setup Display 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Easy Setup], then press . 4 Press C/c to select [Start], then press . The Easy Setup Display appears. 29US