Sony BDV-E980W Operating Instructions - Page 73
BRAVIA Sync [Control for HDMI], Network connection, Built-in/USB wireless LAN connection
View all Sony BDV-E980W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Additional Information "BRAVIA" Sync ([Control for HDMI]) Symptom The [Control for HDMI] function does not work ("BRAVIA" Sync). Problems and solutions • Check that [Control for HDMI] is set to [On] (page 64). • If you change the HDMI connection, turn the system off and on again. • If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 64). • Check the following and refer to the operating instructions supplied with the component. - the connected component is compatible with the [Control for HDMI] function. - the connected component's setting for the [Control for HDMI] function is correct. Network connection Symptom Problems and solutions The system cannot connect to the • Check the network connection (page 27) and the network settings (page 64). network. Built-in/USB wireless LAN connection Symptom Problems and solutions You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. • The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. You cannot connect the system to your wireless LAN router. • Check if the wireless LAN router is on. • Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. • Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication. Move the unit away from such devices, or turn off such devices. The desired wireless router is not • Press RETURN to return to the previous screen, and try [Scan] again. If the detected even if [Scan] is desired wireless router is still not detected, press RETURN to select [Manual performed. registration]. The system cannot connect to the • The distance between the unit and the wireless LAN router is too far (page 27). network or the network connection is unstable. 73US