Sony BDV-N7200W Operating Instructions - Page 20
Getting Started, Step 1: Installing the Speakers, Step 2: Connecting the System
View all Sony BDV-N7200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started Getting Started Step 1: Installing the Speakers Install the speakers by referring to the illustration below. To assemble the speakers, refer to the supplied "Speaker Installation Guide". A Front left speaker (L) B Front right speaker (R) C Center speaker D Surround left speaker (L) E Surround right speaker (R) F Subwoofer G TV Installing the surround speakers in rear position (Speaker layout: [Standard]) A GC B F D E Installing all speakers in front position (Speaker layout: [All Front]) DA G C B E F Note • Be sure to select the speakers layout setting (page 47) according to your speakers placement. • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not lean or hang on a speaker, as it may fall down. • The speakers of this system are not magnetically shielded. This may result in color irregularity when they are placed near a CRT TV or projector. Tip • In order to output more effective sound when [All Front] setting is selected, we recommend you to install your front speakers and surround speakers closer to each other. • You can install the speakers on a wall. For details, refer to the supplied "Speaker Installation Guide". Step 2: Connecting the System Do not connect the AC power cord (mains lead) of the main unit to a wall outlet (mains) until all the other connections are made. Note When you connect other equipment with a volume control, turn down the volume of the equipment to a level where sound is not distorted. 20US