Sony BDV-N7200W Operating Instructions - Page 66
Messages, Picture, PRTECT, PUSH and POWER
View all Sony BDV-N7200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Messages [A new software version is available. Please go to the "Setup" section of the menu and select "Software Update" to perform the update.] appears on the TV screen. t See [Software Update] (page 54) to update the system to a latest software version. "PRTECT", "PUSH" and "POWER" appear alternately in the top panel display. t Press "/1 to turn off the system, and check the following items after "STBY" disappears. • Are the + and - speaker cords short-circuited? • Are you using only the supplied speakers? • Is anything blocking the ventilation holes of the system? • After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. "LOCKED" flashes in the top panel display when you press any button on the main unit. t Set the child lock function to off (page 49). "D. LOCK" appears in the top panel display. t Contact your nearest Sony dealer or local authorized Sony service facility. "E xxxx" (x is a number) appears in the top panel display. t Contact your nearest Sony dealer or local authorized Sony service facility and give the error code. appears without any messages on the entire TV screen. t Contact your nearest Sony dealer or local authorized Sony service facility. "NOT.USE" appears in the top panel display when you press any of the sound field buttons (page 17). t The setting for the sound field buttons cannot be changed when the [Sound Effect] is set to other than [Sound Field On]. Set [Sound Effect] in [Audio Settings] to [Sound Field On] (page 57). Picture There is no picture or the picture is not output correctly. t Check the output method on your system (page 22). t Touch and hold N and VOL - on the main unit for more than 5 seconds to reset the video output resolution to the lowest resolution. t For BD-ROMs, check the [BD-ROM 24p Output] settings in [Screen Settings] (page 55). There is no picture when you make an HDMI cable connection. t The main unit is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant ("HDMI" in the top panel does not light up) (page 22). 3D images from the HDMI (IN 1) or HDMI (IN 2) jack do not appear on the TV screen. t Depending on the TV or video equipment, 3D images may not appear. 66US