Sony BDV-N9100W Operating Instructions 1 - Page 24
Connecting the antenna (aerial), Step 3: Preparing for Network Connection, aerial
View all Sony BDV-N9100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting Started Connecting the antenna (aerial) Rear of the main unit or FM wire antenna (aerial) (supplied) Note • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Tip If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the main unit to an outdoor FM antenna (aerial). Step 3: Preparing for Network Connection Tip To connect the system to your network, perform [Easy Network Settings]. For details, see "Step 5: Performing the Easy Setup" (page 28). Select the method based on your LAN (Local Area Network) environment. • If you use a wireless LAN The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings. • If you use other than a wireless LAN Use a LAN cable to connect to the LAN (100) terminal on the main unit. Broadband router LAN cable (not supplied) Tip A shielded interface cable (LAN cable), straight or crossover, is recommended. 24US