Sony BDV-N9100W Operating Instructions 1 - Page 65
Additional Information, IMPORTANT NOTICE, On cleaning, On cleaning discs, disc/lens, cleaners
View all Sony BDV-N9100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Additional Information On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. On cleaning discs, disc/lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction. On replacement of parts In the events that this system is repaired, repaired parts may be retained for reuse or recycling purposes. On your TV's color If the speakers cause the color irregularity on your TV screen, turn off the TV then turn it on after 15 to 30 minutes. If color irregularity persist, place the speakers further away from the TV set. IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your TV screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen. Plasma display panel televisions and projection televisions are especially susceptible to this. On moving the system Before moving the system, make sure that there is no disc inserted, and disconnect the AC power cord (mains lead) from the wall outlet (mains). On Bluetooth communication • Bluetooth devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. - When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection - Locations where a wireless LAN is installed - Around microwave ovens that are in use - Locations where other electromagnetic waves occur • Bluetooth devices and wireless LAN (IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: - Use this main unit at least 10 meters (33 feet) away from the wireless LAN device. - Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters (33 feet). - Install this main unit and Bluetooth device as closer to each other as possible. • The radio waves broadcast by this main unit may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this main unit and Bluetooth device in the following locations: - In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present - Near automatic doors or fire alarms 65US