Sony BDV-T28 Operating Instructions - Page 39
Setting the Speakers, Other Operations
View all Sony BDV-T28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
• Make sure that the component is connected to the system via an HDMI cable, and the Control for HDMI function of the connected component is set to on. Setting the Speakers [Speaker Settings] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Audio Settings], then press . 4 Press X/x to select [Speaker Settings], then press . The [Speaker Settings] display appears. 5 Press X/x to select the item, then press . Check the following settings. x [Connection] If you do not connect center or surround speakers, set the parameters for [Center] and [Surround]. Since the front speaker and subwoofer settings are fixed, you cannot change them. [Front] [Yes] [Center] [Yes]: Normally select this. [None]: Select this if no center speaker is used. [Surround] [Yes]: Normally select this. [None]: Select this if no surround speaker is used. [Subwoofer] [Yes] x [Distance] When you move the speakers, be sure to set the parameters of the distance (A) from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0.0 to 7.0 meters). The speakers in the illustration correspond to the following: 1Center speaker 2Front left speaker (L) 3Front right speaker (R) 4 Subwoofer 5Surround left speaker (L) 6Surround right speaker (R) 2 1 3 4 A Other Operations A 5 6 [Front Left/Right] 10 ft/3.0 m: Set the front speaker distance. [Center]* 10 ft/3.0 m: Set the center speaker distance. [Surround Left/Right]* 10 ft/3.0 m: Set the surround speaker distance. [Subwoofer] 10 ft/3.0 m: Set the subwoofer distance. * This item appears when you set it to [Yes] in the [Connection] setting. • Depending on the input stream, [Distance] may not be effective. • You can change measurement units (feet or meters) by pressing the color button (RED). x [Level] You can adjust the sound level of the speakers. You can set the parameters from -6.0 dB to +6.0 39US