Sony BKM-21D Installation Manual - Page 28
Specifications, Assigning Input Signals to Connectors, General, Input/Output Connectors
View all Sony BKM-21D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
BKM-20D SDI 4:2:2 Decoder Adaptor Assigning Input Signals to Connectors Before inputting signals to the BKM-20D, you must specify the type and format of the signal that will be input to each connector. To assign input signals to each connector, use the on-screen INPUT CONFIGURATION menu of your video monitor. For information about using the INPUT CONFIGURATION menu, refer to the manual of your video monitor. Specifications General Voltage +5 V, ±6 V (supplied from the monitor) Power consumption 8 W Recommended operating temperature 20°C to 30°C (68°F to 86°F) Permissible operating temperature 0°C to 40°C (32°F to 104°F) Operating humidity 0% to 90% (no condensation) Maximum external dimensions (w/h/d) 25 × 256 × 245 mm (31/32 × 101/8 × 93/4 inches) Mass 768g (1 lb 11 oz) Input/Output Connectors Digital input Analog input BNC × 3, with active loopthrough output BNC × 3, high impedance, with loop-through output Signal Characteristics Analog composite signals Signal level 1 Vp-p +3 dB/-6 dB Return loss -46 dB min. (7 MHz) Analog component (Y/R-Y/B-Y, RGB) signals Signal level Y/R-Y/B-Y Y: 1 Vp-p ±6 dB R-Y: 0.7 Vp-p ±6 dB B-Y: 0.7 Vp-p ±6 dB R/G/B 1 Vp-p ±6 dB (sync on G) Frequency characteristics Y 100 Hz to 10 MHz ±1 dB R-Y/B-Y 100 Hz to 6 MHz ±1 dB R/G/B 100 Hz to 10 MHz ±1 dB Chrominance signal/luminance signal Delay time error 30 nsec max. Gain error 5% max. Aperture compensation (Y/R-Y/B-Y) 6 dB min. (5 MHz) Return loss -46 dB min. (7 MHz) Digital component (525, 625) signals Sampling frequency Y: 13.5 MHz R-Y/B-Y: 6.75 MHz Frequency characteristics Y: 100 Hz to 5.75 MHz ±1 dB R-Y/B-Y: 100 Hz to 2.75 MHz ±1 dB Chrominance/luminance signals Delay time error 30 nsec max. Gain error 5% max. K factor 1% max. (2T pulse) Aperture compensation 6 dB min. (5 MHz) Quantization 10 bits/sample Transmission distance 200 m (approx. 656 ft) max. (When using 5C-2V coaxial cables (Fujikura, Inc.) or equivalent.) Return loss 5 MHz to 270 MHz -15 dB min. Accessories Supplied Installation Manual (1) Design and specifications are subject to change without notice. 4(E)