Sony BSV-M1 Operating Instructions - Page 7
System Configuration, System Requirements
UPC - 027242601611
View all Sony BSV-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
System Configuration Normally, this server (the head unit) is connected to the library unit. Using the backup application built into the server, you can integrate and backup data to the library from backup clients. Connecting the server directly to a network allows you to configure the server and perform maintenance remotely through a web browser. The illustration below shows the server in conjunction with the Sony AIT Library (LIB-162). Computer for setup and management Head unit (BSV-M1) POWER LAN 100M HDD SYSTEM MENU ENTER CANCEL Ultra 2 SCSI Make server settings and perform maintenance Library unit (LIB-162) Ethernet File server File server Backup clients application server Note • Connect the server to the library unit with a SCSI cable. • Control the library unit from this server. System Requirements The hardware and software required to control this server are as follows. Computer for Setup and Management Prepare a computer that can run one of the following browsers. • Browser Software - Microsoft Internet Explorer 5.0 (for Windows) - Netscape Communicator 4.7 (for Windows) - Netscape Communicator 4.7 (for Macintosh) - Netscape Communicator 4.7 (for Solaris and Linux) Library The following Sony library is required: • LIB-162 7 Chapter 1 Introduction