Sony BVM-HX310 Operating Instructions - Page 26

Submenu YCC Range Color Space Setting Select from the following when "VPID Auto" is set to "Off" and the YCbCr signal is input.  Full: 0 to 1023 (10bit) / 0 to 4095 (12bit)  Limited: 64 to 940 (Y), 64 to 960 (Cb/Cr) (10bit) / 256 to 3760 (Y), 256 to 3840 (Cb/Cr) (12bit) (Default value)  SDI Full Range 1): 4 to 1019 (Y/Cb/ Cr) (10bit) / 16 to 4076 (Y/Cb/Cr) (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range. Select the color space from the following when "VPID Auto" is set to "Off."  ITU-R BT.709 (Default value)  EBU  SMPTE-C  Native 1)  S-Gamut/S-Gamut3  S-Gamut3.Cine  DCI-P3  ITU-R BT.2020 1) Displays with the unit's color space of the three primary color chromaticity points. This is the widest color space setting which the unit can reproduce. Transfer Matrix Note When "Signal Format" is set to "Auto" or "444 XYZ 12bit" and the XYZ signal is input, the optimum setting for the XYZ signal is fixed. Select the transfer matrix from the following when "VPID Auto" is set to "Off."  ITU-R BT.709 (Default value)  ITU-R BT.2020 Set the following depending on the "Color Space" setting. When "ITU-R BT.2020" is selected: Select ITU-R BT.2020. When "ITU-R BT.709" is selected: Select ITU-R BT.709. When another item is selected: Select the transfer matrix setting of the device which outputs the signal. Note When "Signal Format" is set to "Auto" or "444 XYZ 12bit" and the XYZ signal is input, the optimum setting for the XYZ signal is fixed. Submenu EOTF Signal Format 1080I/PsF Setting Select the gamma from the following when "VPID Auto" is set to "Off."  2.2  2.4 (Default value)  2.6  CRT  2.4(HDR)  S-Log3(HDR)  S-Log2(HDR)  SMPTE ST 2084(HDR)  ITU-R BT.2100(HLG)  S-Log3(Live HDR) When "ITU-R BT.2100(HLG)" is selected  HLG System Gamma: Sets the system gamma of the HLG. Set from 1.000 to 1.500. (Default value: 1.200) Notes  When "Signal Format" is set to "Auto" or "444 XYZ 12bit" and the XYZ signal is input, the optimum setting for the XYZ signal is fixed.  The brightness adjustment of "ITUR BT.2100(HLG)" supports the ITU-R BT.2100-2 standard.  The brightness adjustment of "SMPTE ST 2084(HDR)" supports the ITU-R BT.814-4 standard.  The brightness-adjustment specifications of "S-Log3(HDR)," "SLog2(HDR)," and "S-Log3(Live HDR)" are the same as the specification of "SMPTE ST 2084(HDR)." Sets the signal format of the SDI 2K signal.  Auto (Default value)  422 YCbCr 10bit  444 RGB 10bit  444 YCbCr 10bit  444 RGB 12bit  444 YCbCr 12bit  444 XYZ 12bit Set how to display when 50I, 59.94I, 60I, 25PsF, 29.97PsF, or 30PsF SDI 2K signals are input. 23.98 Hz and 24 Hz signals are processed as the PsF signal.  Auto: When Payload ID is added to SDI signals, they are processed based on the ID data. They are processed as the interlace signals without the Payload ID. (Default value)  PsF: Processes as the PsF signal.  Interlace: Processes as the interlace signal. 26