Sony CAV-CVS12ES Installation Manual - Page 9
Switcher as shown below.
View all Sony CAV-CVS12ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting up the Component Video Switcher Using rack-mount brackets You can also mount the Component Video Switcher into a rack. Make sure that you measure the space needed before mounting. 1 Detach the four feet of the Component Video Switcher. 2 Detach the six screws attached to the Component Video Switcher as shown below. Screws Screws 3 Install the rack-mount brackets onto the Component Video Switcher with the six screws detached in step 2 as shown below. Make sure that the rack-mount brackets are installed securely. Screws Rack-mount bracket (supplied) 4 Mount the Component Video Switcher into the rack as shown below. Make sure that the Component Video Switcher is installed securely. POWER 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 ZONE SOURCE Rack Screws (not supplied) Rack Screws (not supplied) Notes Use the M4 × 11/32 inch (8mm) screws (attached to the Component Video Switcher) for installing the rack-mount brackets onto the Component Video Switcher. In case the screws are missing, use M4 screws with a maximum diameter of 1/2 inch (12mm). Use screws with a minimum diameter of 3/16 inch (4mm) when you mount the Component Video Switcher into the rack. Make sure you check the rack manufacturer's specifications before you mount the Component Video Switcher into the rack. This is to ensure mechanical stability. This Component Video Switcher requires 2U height when you mount the Component Video Switcher on a standard rack. Rack-mount bracket (supplied) Screws US