Sony CCD-FX425 Primary User Manual - Page 10
Installing, Lithium, Battery
View all Sony CCD-FX425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the Lithium Battery To keep birth dates in the camcorder's memory and to activate the clock, the lithium battery must be installed. 1 Remove the lithium battery holder located at the bottom of the camcorder. 0 2 Install the supplied CR2025 lithium battery with the + side facing down. 00204 SONY (+) MOVIrlf 0 3 Put the lithium battery holder into the camcorder. Lithium battery life The battery will last for approximately 1 year in normal operation. When the lithium battery becomes weak, the indicator will blink in the viewfinder screen for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025. Use of any other battery may present a risk of fire or explosion. When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise, resetting the date, time and birth dates will be necessary. Changing the lithium battery Remove the lithium battery holder from the camcorder, and pull out the lithium battery and insert a new one. WARNING Cautions The battery may explode if mistreated. Do not recharge. disassemble, or dispose of it in fire. • Keep the lithium battery out of the reach of children. Should the battery be swallowed. immediately consult a doctor. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. 10 Getting Started