Sony CCD-TRV107 Primary User Manual - Page 73
Troubleshooting, Types of trouble and their solutions
View all Sony CCD-TRV107 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Troubleshooting - Troubleshooting - Types of trouble and their solutions If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If "C:ss:ss" appears on the screen, the self-diagnosis display function has worked. See page 77. In the recording mode Symptom START/STOP does not operate. The power goes off. The image on the viewfinder screen is not clear. The SteadyShot function does not work.* The autofocusing function does not work. The x indicator flashes in the viewfinder. The picture does not appear in the viewfinder. A vertical band appears when you shoot a subject such as lights or a candle flame against a dark background. Cause and/or Corrective Actions • The POWER switch is set to OFF (CHG) or PLAYER. c Set it to CAMERA. (p. 19) • The tape has run out. c Rewind the tape or insert a new one. (p. 18, 29) • The write-protect tab is set to expose the red mark. c Use a new tape or slide the tab. (p. 18) • The tape is stuck to the drum (moisture condensation). c Remove the cassette and leave your camcorder for at least 1 hour to acclimate. (p. 84) • While being operated in CAMERA mode, your camcorder has been in the standby mode for more than 5 minutes. c Set the POWER switch to OFF (CHG) and then to CAMERA again. (p. 19) • The battery pack is dead or nearly dead. c Install a fully charged battery pack. (p. 11, 12) • The viewfinder lens is not adjusted. c Adjust the viewfinder lens. (p. 23) • STEADYSHOT is set to OFF in the menu settings. c Set it to ON. (p. 68) • The wide mode is set to 16:9FULL. c Set it to OFF. (p. 68) • The setting is the manual focus mode. c Press FOCUS to return to the autofocus mode. (p. 41) • Shooting conditions are not suitable for autofocus. c Adjust to focus manually. (p. 41) • The video heads may be dirty. c Clean the heads using the Sony V8-25CLD cleaning cassette (optional). (p. 85) • The LCD panel is open. c Close the LCD panel. (p. 20) • The contrast between the subject and background is too high. This is not a malfunction. A vertical band appears when you shoot a very bright subject. • This is not a malfunction. (continued on the following page) 73