Sony CCD-TRV107 Primary User Manual - Page 76
Symptom, Cause and/or Corrective Actions, Set it to OFF CHG.
View all Sony CCD-TRV107 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Types of trouble and their solutions Symptom Cause and/or Corrective Actions You cannot install the USB driver.*1) USB Streaming function does not work*1) The Remote Commander supplied with your camcorder does not work.*2) The date or time indicator does not appear, and the bars "--:--:--" appear. • Your camcorder was connected to your computer with the USB cable before installing the USB driver, so the driver was not recognized by the computer. c Uninstall the unrecognized driver, and then reinstall the driver. (p. 60) • The USB driver is not installed correctly. c Uninstall the unrecognized driver, and then reinstall the driver. (p. 61 to 63) • Your computer's operating system is Windows 98 or earlier. • The USB cable was not connected before starting up the application software. c Connect the USB cable before starting up the application software. (p. 63) • COMMANDER is set to OFF in the menu settings. c Set it to ON. (p. 72) • Something is blocking the infrared rays. c Remove the obstacle. • The batteries are inserted in the battery holder with the + - polarities incorrectly matching the + - marks. c Insert the batteries with the correct polarity. (p. 96) • The batteries are dead. c Insert new ones. (p. 96) • Set the date and time. (p. 16) The melody or beep sounds for 5 seconds. No function works though the power is on. While charging the battery pack, no indicator appears or the indicator flashes in the display window. You cannot charge the battery pack installed to your camcorder. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimate. (p. 84) • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. • Disconnect the power cord of the AC power adaptor or remove the battery pack, then reconnect it after about 1 minute. Turn the power on. (p. 19) If the functions still do not work, press RESET using a sharp-pointed object. (If you press RESET, all the settings including the date and time return to the default.) (p. 95) • The AC power adaptor is disconnected. c Connect it firmly. (p. 15) • The battery pack is not installed properly. c Install it properly. • Something is wrong with the battery pack. c Contact your Sony dealer or local authorized Sony service facility. • The POWER switch is not set to OFF (CHG). c Set it to OFF (CHG). *1) CCD-TRV608 only *2) CCD-TRV107/TRV408 only 76