Sony CCD TRV608 Operating Instructions - Page 46
Using the built-in light, CAUTION, DANGER
UPC - 027242600256
View all Sony CCD TRV608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using the built-in light - CCD-TRV107/TRV308/TRV408/TRV608 only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1.5 m (5 feet). Press LIGHT repeatedly, until the indicator appears on the screen while your camcorder is in CAMERA mode. The built-in light turns on. If you turn the POWER switch to OFF (CHG), the built-in light turns off simultaneously. You cannot turn the built-in light on by turning the POWER switch to CAMERA again. To turn on the built-in light again, press LIGHT again in CAMERA mode. LIGHT Built-in light To turn off the built-in light Press LIGHT repeatedly, until no indicator appears on the screen. To turn on the built-in light automatically Press LIGHT repeatedly, until the indicator appears on the screen. The built-in light automatically turns on and off according to the ambient brightness. CAUTION Be careful not to touch the lighting section, because the plastic window and surrounding surfaces are hot while the light is on. It remains hot for a while after the light is turned off. DANGER Not to be handled by children. Emits intense heat and light. Use with caution to reduce the risk of fire or injury to persons. Do not directly aim the light at persons or materials from less than 1.22 m (4 feet) during use and until cool. Turn the built-in light off when not in use. When you press LIGHT The indicator changes as follows: no indicator 46