Sony CCD TRV608 Operating Instructions - Page 75
Others, Types of trouble and their solutions, Symptom, Cause and/or Corrective Actions - troubleshooting
UPC - 027242600256
View all Sony CCD TRV608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Troubleshooting Types of trouble and their solutions Symptom Cause and/or Corrective Actions The end search function does not work. • The tape was ejected after recording. • You have not recorded on the cassette yet. The battery pack discharges quickly. • The operating temperature is too low. • The battery pack is not fully charged. c Charge the battery pack fully again. (p. 11, 12) • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 11) The remaining battery time indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 11) • The battery pack is not fully charged. • A deviation has occured in the remaining battery time. c Charge the battery pack fully again. (p. 11, 12) The power goes off although the remaining battery time indicator indicates that the battery pack has enough power to operate. • A deviation has occured in the remaining battery time. c Charge the battery pack fully again so that the indication on the battery remaining indicator is correct. (p. 11, 12) The cassette cannot be removed from the holder. • The power source is disconnected. c Connect it firmly. (p. 11, 15) • The battery pack is dead. c Use a charged battery pack. (p. 11, 12) The % and Z indicators flash and no functions except for cassette ejection work. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimate. (p. 84) The remaining tape indicator is not displayed. • The q REMAIN is set to AUTO in the menu settings. c Set it to ON to always display the remaining tape indicator. (p. 70) Others Symptom Easy Dubbing does not function. Cause and/or Corrective Actions • Your VCR and/or video camera recorder is not set correctly. c Make sure the input selector of the VCR is set to LINE. Also, make sure the power switch of the video camera is set to VTR/VCR. (p. 51) • The IR SETUP code or PAUSE MODE is not set correctly. c Select the correct IR SETUP code and PAUSE MODE, according to your VCR. Then confirm VCR operation with the IR TEST function. (p. 52 to 55) (continued on the following page) 75