Sony CCD-TRV81 Operating Instructions - Page 74
Sony CCD-TRV81 Manual
View all Sony CCD-TRV81 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Trouble check Symptom Cause and/or Corrective Action and indicators flash and no function except for cassette ejection works. • Moisture condensation has occurred. 4 Remove the cassette and leave the camcorder for at least 1 hour. (p. 67) The date or time indicator is flashing. • You pressed DATE and TIME together for more than 2 seconds. 4 The camcorder is not malfunctioning. You may start recording. Flashing will stop soon. • The lithium battery is weak or dead. 4 Replace the lithium battery with a new one. (p. 61) The tape does not move when a video control button is pressed. • The POWER switch is set to CAMERA or OFF. 4 Set it to VTR. • The tape has run out. 4 Rewind the tape or use a new one. (p. 17) The Steady Shot function does not activate. • STEADY SHOT is set to OFF. 4 Set STEADY SHOT to ON. (p. 37) • The Steady Shot function does not work when the wide mode is set to.16:9 FULL. The autofocusing function does not work. • FOCUS is set to MANUAL. 4 Set it to AUTO. (p. 32) • Shouting conditions are not suitable for autofocus. 4 Set FOCUS to MANUAL to focus manually. (p. 32) The fader function does not work. • The START/STOP MODE switch is set to 5SEC or 4 Set it to (p. 44) • A title is displayed. 4 Stop superimposing the title. (p. 38) No sound or only a low sound is heard when playing back a tape. • The stereo tape is played back with HiFi SOUND set to 1 or 2 in the menu system. 4 Set to STEREO in the menu system. (p. 26) Excessive high-pitched sound is heard. • The picture has been recorded with WIND set to ON in the menu system. 4 When there is no wind, set it to OFF. (p. 25) Data code becomes CCD- • You are playing back a portion of tape on which you wrote or TRV81 only) erased the index signal. This is not a malfunction. (p. 50) The date or time indicator disappears. • Reset the date and time. (p. 62) Picture Symptom Cause and/or Corrective Action The image on the viewfinder screen • The viewfinder lens is not adjusted. is not clear. 4 Adjust the viewfinder lens. (p. 11) A vertical band appears when a subject such as lights or a candle flame is shot against a dark background. • The contrast between the subject and background is too high. The camcorder is not malfunctioning. 4 Change locations. 72