Sony CDX-CA650X Operating Instructions - Page 20

Setting the equalizer, CD, or MD. - xplod

Page 20 highlights

Setting the equalizer You can select an equalizer curve for seven music types (VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and XPLOD). You can store and adjust the equalizer settings for frequency and level. Selecting the equalizer curve 1 Press (SOURCE) to select a source (radio, CD, or MD). 2 Press (EQ7) repeatedly until the desired equalizer curve appears. Each time you press (EQ7), the item changes. To cancel the equalizing effect, select "OFF." After 3 seconds, the display returns to the normal playback mode. Adjusting the equalizer curve 1 Press (MENU). 2 Press either side of (DISC/PRESET) repeatedly until "EQ7 TUNE" appears, then press (ENTER). 3 Press either side of (SEEK) to select the desired equalizer curve, then press (ENTER). Each time you press (SEEK), the item changes. 4 Select the desired frequency and level. 1 Press either side of (SEEK) to select the desired frequency. Each time you press (SEEK), the frequency changes. 62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16.0 kHz 2 Press either side of (DISC/PRESET) to adjust the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To restore the factory-set equalizer curve, press (ENTER) for two seconds. 5 Press (MENU) twice. When the effect setting is complete, the normal playback mode appears. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

20
Setting the equalizer
You can select an equalizer curve for seven
music types (VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and XPLOD).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1
Press
(SOURCE)
to select a source (radio,
CD, or MD).
2
Press
(EQ7)
repeatedly until the desired
equalizer curve appears.
Each time you press
(EQ7)
, the item
changes.
To cancel the equalizing effect, select
“OFF.”
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1
Press
(MENU)
.
2
Press either side of
(DISC/PRESET)
repeatedly until “EQ7 TUNE” appears,
then press
(ENTER)
.
3
Press either side of
(SEEK)
to select the
desired equalizer curve, then press
(ENTER)
.
Each time you press
(SEEK)
, the item
changes.
4
Select the desired frequency and level.
1
Press either side of
(SEEK)
to select
the desired frequency.
Each time you press
(SEEK)
, the
frequency changes.
62 Hz
y
157 Hz
y
396 Hz
y
1.0 kHz
y
2.5 kHz
y
6.3 kHz
y
16.0 kHz
2
Press either side of
(DISC/PRESET)
to
adjust the desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer
curve, press
(ENTER)
for two seconds.
5
Press
(MENU)
twice.
When the effect setting is complete, the
normal playback mode appears.