Sony CDX-CA760X Operating Instructions - Page 17

By rotating the control, By pushing in and rotating the control, Changing the operative direction

Page 17 highlights

*1 Only if the corresponding optional equipment is connected. *2 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. By rotating the control Changing the operative direction The operative direction of controls is factory-set as shown below. To increase SEEK/AMS control To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Rotate and release to: - Skip tracks. - Tune in stations automatically. Rotate, hold, and release to: - Fast-forward/reverse a track. - Find a station manually. By pushing in and rotating the control PRESET/DISC control Press (SOUND) for 2 seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (page 18). Push in and rotate the control to: - Receive preset stations. - Change the disc*. * When an optional CD/MD unit is connected. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

17
*1
Only if the corresponding optional equipment is
connected.
*2
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press
(OFF)
for
2 seconds to turn off the clock indication after
turning off the ignition.
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change the disc*.
*
When an optional CD/MD unit is connected.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (page 18).
SEEK/AMS
control
PRESET/DISC
control
To increase
To decrease