Sony CDX-CA900X Operating Instructions - Page 21

Selecting the spectrum analyzer (SA), Connecting auxiliary audio equipment

Page 21 highlights

3 Press < or , to select the cut-off frequency. Each time you press < or ,, the frequency changes as follows: off (default setting) y 125Hz y 78Hz 4 Press (MENU). After the frequency setting is complete, the display returns to normal playback mode. Selecting the spectrum analyzer (SA) The sound signal level is displayed on a spectrum analyzer. You can select a display for 10 patterns (SA 1-9), off (spectrum analyzer off), or the automatic display mode where all the patterns appear. 1 Press (SOURCE) to select a desired source. 2 Press (MENU). 3 Press M or m repeatedly until "SA" appears. 4 Press < or , to select the desired setting. 5 Press (MENU). After the setting is complete, the display returns to normal playback mode. Connecting auxiliary audio equipment The unit's AUX IN (external audio input) terminal on this unit is also used as the BUS AUDIO IN (audio input) terminal. You can listen to the sound from your car speakers by connecting an optional Sony portable devices. Note If you connect an optional Sony CD/MD unit, you cannot connect any portable devices and cannot select "AUX." Selecting auxiliary equipment Press (SOURCE) repeatedly to select "AUX." Adjusting the volume level You can adjust the volume for each connected audio equipment. 1 Press (MENU), then press M or m repeatedly until "AUX Level" appears. 2 Press (ENTER). 3 Press M or m repeatedly to select the desired volume level. The volume level is adjustable in 1 dB steps from -6 dB to +6 dB. 4 Press (MENU) twice. After the setting is complete, the display returns to normal playback mode. To deactivate auxiliary equipment in the music source display 1 Press (OFF). CD/MD playback or radio reception stops (the key illumination and display remain on). 2 Press (MENU). 3 Press M or m repeatedly until "AUX- A·····on" appears. 4 Press , to select "AUX-A····off." 5 Press (MENU). To restore the indication, select "AUX-A····· on." 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

21
3
Press
<
or
,
to select the cut-off
frequency.
Each time you press
<
or
,
, the frequency
changes as follows:
off
(default setting)
y
125Hz
y
78Hz
4
Press
(MENU)
.
After the frequency setting is complete, the
display returns to normal playback mode.
Selecting the spectrum
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 10 patterns
(SA·········1-9), off (spectrum analyzer off), or the
automatic display mode where all the patterns
appear.
1
Press
(SOURCE)
to select a desired
source.
2
Press
(MENU)
.
3
Press
M
or
m
repeatedly until “SA”
appears.
4
Press
<
or
,
to select the desired
setting.
5
Press
(MENU)
.
After the setting is complete, the display
returns to normal playback mode.
Connecting auxiliary audio
equipment
The unit’s AUX IN (external audio input)
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting an optional Sony
portable devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and cannot
select “AUX.”
Selecting auxiliary equipment
Press
(SOURCE)
repeatedly to select
“AUX.”
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press
(MENU)
, then press
M
or
m
repeatedly until “AUX Level” appears.
2
Press
(ENTER)
.
3
Press
M
or
m
repeatedly to select the
desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
4
Press
(MENU)
twice.
After the setting is complete, the display
returns to normal playback mode.
To deactivate auxiliary equipment in
the music source display
1
Press
(OFF)
.
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press
(MENU)
.
3
Press
M
or
m
repeatedly until “AUX-
A·····on” appears.
4
Press
,
to select “AUX-A····off.”
5
Press
(MENU)
.
To restore the indication, select “AUX-A····· on.”